Aluminum melting furnace is a heating furnace used to complete aluminum melting. When using it, in order to ensure the quality of the process, we must pay attention to the following matters:

1. Do not overload, and strictly control the temperature in the furnace. Too high or too low temperature will cause the temperature of the furnace to drop, which will cause the temperature of the furnace to drop.

2. A heat-insulating glass should be installed on the top of the melting aluminum furnace.

3. The floor of the furnace should be kept dry, and no items should be stacked on the ground.

4. It is strictly forbidden to spray fire during welding, and fire should not be carried during welding.

5. During work, fireproof gloves must be worn to protect the eyes and mouth and nose, especially when in direct contact with molten iron, be careful to avoid splashing.

6. When observing the fire, do not stand by the door of the furnace, which will burn yourself. When cleaning the slag, you should cooperate with other personnel to prevent burns.

7. Non-duty personnel are prohibited from using machines.

8. When the forklift is transporting materials, drive carefully and do not collide with the furnace door.

10. Carefully keep records of on-duty work and shift handovers, clean the site, and turn off all electrical appliances.

11. Strictly follow the production procedures and do not violate the regulations.

12. Regularly inspect and overhaul the furnace body, check thermal expansion, relaxation, and bolt tightness.

13. The electric heating elements used, such as hot-melt aluminum furnace heaters, thermostats, etc., must comply with relevant safety standards and meet relevant installation requirements.

14.Workers should wear work clothes, work hats, gloves and labor protection shoes.Wear safety helmets, goggles, dust masks and other labor protection equipment.

15.Check the operating conditions of various parts of the machine tool and whether the electrical equipment is operating normally. If there is any abnormality,

16. When igniting the aluminum melting furnace, do not insert the torch into the burner hole, which will cause "backfire" and cause explosion.